Tapware Buying Guide

Tapware should be selected for the fixture, mounting method and plumbing conditions. Looks matter, but spout reach, handle clearance and compatible connections determine whether it works well.

Choose the right type

• Basin and sink mixers combine hot and cold control in one body.
• Three-piece, wall-mounted, floor-mounted and hob-mounted sets need the correct number and position of installation holes.
• Bath, shower, diverter, commercial and accessible tapware have different control and outlet requirements.

Measure before you order

Record the finished dimensions and compare them with the product drawing. Check:

• Spout reach and outlet height over the basin, bath or sink
• Mounting-hole number, size and spacing
• Clearance for handles, splashbacks and cabinets
• Existing water connections and pressure conditions

Check compatibility and inclusions

• Match the tapware to the fixture and mounting surface
• Check included in-wall bodies, hoses, plates and fittings
• Review applicable WELS and WaterMark documentation on the product
• Use a licensed plumber and follow the installation instructions

Product inclusions and installation requirements vary. Use the individual product page and supplied documentation as the final reference. If information is missing, contact our team before ordering.

Care and maintenance

Clean with warm water, a soft cloth and a mild product. Avoid abrasive pads, bleach and harsh chemicals, especially on matte, brushed or plated finishes.

Frequently asked questions

Can any mixer be used with any basin?

No. Compare spout reach, outlet height and tap-hole position to reduce splash and improve clearance.

Are in-wall parts included?

It varies. Confirm the body, trim kit and other required parts before the wall is closed.

Does WELS measure water pressure?

No. It reports water efficiency and flow information, not the pressure available at your property.

Browse bathroom tapware or contact BestenHome for help checking a product before ordering.

This guide provides general selection information. Always confirm the current product specification and use appropriately qualified trades for regulated work.