Mapei® Mapeproof Turbo 1K Surface Membrane 10kg
Mapei® Mapeproof Turbo 1K Surface Membrane 10kg is backordered and will ship as soon as it is back in stock.
Delivery review before dispatch
Your product payment is collected at checkout. We will review the delivery address, product handling and access requirements before dispatch.
Eligible Greater Sydney orders may receive A$0 standard ground-level base delivery. If additional freight, stairs, difficult access or special handling is required, we will confirm the charge and send a balance invoice before dispatch.
Pickup available at 283 Victoria Road
Usually ready in 24 hours
Product information
Product information
See the product description and available specifications below. Contact BestenHome if you need supplier documentation for a product.
Delivery and collection
Delivery and collection
Delivery options and charges depend on product size, destination and availability. Final delivery arrangements will be confirmed before dispatch.
Mapei® Mapeproof Turbo 1K Surface Membrane 10kg
Description
Description
Mapeproof 1K Turbo
One-Component Polyurethane Moisture Barrier & Screed Consolidator
Mapeproof 1K Turbo is a premium single-component, solvent-free polyurethane surface membrane designed for waterproofing and consolidating cementitious screeds before the installation of timber, resilient and other floor coverings.
With no mixing required and minimal product waste, it offers a fast, clean and professional solution for flooring preparation. Its very low VOC emission rating makes it suitable for residential, commercial and occupied environments where odour and air quality are important considerations.
Key Benefits
Single-component formula — no mixing required
Solvent-free, odourless and non-flammable
Very low VOC emissions
Helps control excessive residual moisture in cementitious screeds
Consolidates mechanically weak or dusty screeds
Fast drying and quick tack-free time
Allows timber flooring installation after a short waiting period
Suitable for brush or roller application
Ideal for residential and commercial flooring projects
Recommended Uses
Mapeproof 1K Turbo is suitable for use on cementitious screeds that are not affected by rising damp but contain residual moisture levels above the recommended limit for flooring installation.
It is commonly used:
To consolidate cementitious screeds that are mechanically weak
As a surface moisture barrier before timber flooring installation
To reduce the risk of flooring failure caused by excessive residual moisture
Prior to laying wood flooring, resilient flooring or other suitable floor coverings
In apartments, schools, offices, homes and commercial spaces where low odour and low VOC products are preferred
Technical Performance
Mapeproof 1K Turbo cures through the moisture naturally present in the air and in the screed. Once applied, it hardens quickly to create a stronger, more durable and abrasion-resistant substrate.
Under normal temperature and humidity conditions, the surface quickly loses tackiness and may allow timber flooring installation after approximately 2 hours, depending on site conditions.
Coverage & Application
Important Application Notes
Do not dilute with water or solvent
Do not apply below +5°C
Do not apply on wet surfaces or where rising damp is present
Do not allow the product to puddle on the substrate surface
Not suitable as a vapour membrane over heated screeds
If levelling compound is required, or if timber flooring will be installed after more than 24 hours, the surface should be fully broadcast with quartz sand while the membrane is still fresh
Timber flooring must be installed using a compatible reactive polyurethane, epoxy-polyurethane or silane-based adhesive
Professional Flooring Preparation Solution
Mapeproof 1K Turbo provides a reliable and efficient solution for preparing cementitious substrates before flooring installation. Its fast-curing, solvent-free and low-emission formulation makes it an excellent choice for projects requiring moisture control, substrate strengthening and professional flooring performance.
- Consumption: Approx. 50m² per 10kgApplication Rate: Approx. 200g per m²Application Method: Brush or roller
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
